Our Products
Dutchclamp North America Products.
Dutchclamp cable clamps and blocks are suitable for mounting and securing high, medium and low voltage cables. The range of models available for each type of cable clamp and cleat ensures a perfect fit to achieve the required short-circuit-proof mounting of the cables.
Product Types.
The following types of clamps and blocks are available:
-
SE Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in single configuration. Cable diameter range: 15 - 135 mm.
-
SEG Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in single configuration. This variety of single clamps are stackable, saving you installation space and mounting time. These clamps allow mounting with a single stud thanks to the hole on the bottom half. Cable diameter range: 26 - 110 mm.
-
TRIPLE Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in a triangular configuration (trefoil formation). Our TRIPLE Clamps are stackable, saving you installation space and mounting time. Cable diameter range: 27 - 150 mm.
-
IM Block Clamps: suitable for all applications requiring at least three cables with diameter 12 to 48 mm. The mounting holes are Ø13 mm, allowing the threaded bolts to be extended at any desired location, thereby eliminating the possibility of damage when cables are installed in multiple layers. Existing configurations can be expanded at any time... easily, simply and at a reduced cost.
-
SOLO Clamps: for mounting grounding/earthing cables next to the power cables. For grounding/earthing cables with diameter in the 18 to 42 mm range.
The SEG, TRIPLE and IM types are stackable. Cable blocks can be supplied in different configurations, depending on your needs.
Optional Items.
-
Stainless steel hardware sets: All the clamps can be delivered with the necessary mounting hardware (nuts, bolts and washers), as well as channel nuts if the clamps will be mounted onto Unistrut.
-
Elastic Inlay: An elastic inlay can be supplied to provide additional protection to the cable outer jacket. The use of elastic inlays allows to apply higher torques when securing the cables, as well as absorb variations in the cable outer diameter due to temperature changes.
-
Kits: clamps and blocks can be delivered as kits for ease of delivery to the field or jobsite. The kits can be customized to include hardware, channel nuts and/or elastic inlay pads, packaged and labeled individually.
Coverall - Two Part Cable Ducts.
Do you have cables or tubes that are already connected and in use but still in need of protection? In that case, we have a suitable solution: The Coverall two-part cable duct.
Top Quality.
All the Dutchclamp cable clamps are manufactured in the Netherlands using state-of-the-art materials, with polyamide (PA) as the main constituent element and 30% fiberglass reinforcement. The unique design, in combination with the specific composition of the raw materials, makes these cleats among the strongest in the world. Our top quality clamps are used in diverse applications all around the world.