• Home
  • Products
  • Applications
  • Technical Information
    • SE Types - Product Specifications
    • SEG Types - Product Specifications
    • TRIPLE Types - Product Specifications
    • IM Block Clamps - Product Specifications
    • Mounting Hardware Sets
    • Elastic Inlay Pads
    • Coverall - Two Part Ducts
    • Polefix - Product Specifications
    • Installation Instructions >
      • Recommendations for Mounting Clamps
      • Recommended Torque Values for Mounting Hardware
      • Videos - Mounting Clamps and Hardware
  • FAQ
  • References
  • About
  • Contact
Dutchclamp North America

Dutchclamp Products

Dutchclamp® cable clamps and blocks are suitable for mounting and securing low, medium and high voltage cables. The range of models available for each type of cable clamp and cleat ensures a perfect fit to achieve the required short-circuit-proof mounting of the cables.

Product Types
The following types of clamps and blocks are available:
  • SE Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in single configuration.
 Cable diameter range: 15 - 170 mm.
  • SEG Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in single configuration.
 This variety of single clamps are stackable, saving you installation space and mounting time. Cable diameter range: 26 - 80 mm.
  • TRIPLE Clamps: for short-circuit-proof mounting of single- and multi-conductor cables in a triangular configuration (trefoil formation).
TRIPLE Clamps are stackable, saving you installation space and mounting time. Cable diameter range: 27 - 150 mm.
  • IM Block Clamps: suitable for all applications requiring at least three cables with diameter 12 to 48 mm. The mounting holes are Ø13 mm, allowing the threaded bolts to be extended at any desired location, thereby eliminating the possibility of damage when cables are installed in multiple layers. Existing configurations are modular and can be expanded at any time... easily, simply and at a reduced cost.

The SEG, TRIPLE and IM types are stackable. Cable blocks can be supplied in different configurations, depending on your needs.

Click here for Technical Information

Optional Items
  • Hardware Sets: all the clamps and blocks can be delivered with the necessary mounting hardware (nuts, bolts and washers), in galvanized or stainless steel. Click here for Technical Information
  • Elastic Inlay: Neoprene elastic inlay pads can be supplied to provide additional protection to the cable outer jacket. The use of elastic inlays allows to apply higher torques when securing the cables, as well as absorb a certain degree of variations in the cable outer diameter due to temperature changes. Click here for Technical Information
  • Kits: clamps and blocks can be packaged along with their mounting sets, elastic inlay pads, etc. as individual kits upon request.

Coverall - Two Part Cable Ducts

Do you have cables or tubes that are already connected and in use but still in need of protection? In that case,
we have a suitable solution: the Coverall two-part cable duct. 


Click here for more information about Coverall

Top Quality
All the Dutchclamp® cable clamps are manufactured in the Netherlands using state-of-the-art materials, with polyamide (PA) as the main constituent element and 30% fiberglass reinforcement. The unique design, in combination with the specific composition of the raw materials, makes these cleats among the strongest in the world. Our top quality clamps are used in more than 20 countries throughout the world.
Home
Products
Applications
Technical Information
FAQ
About
Contact
Privacy Policy
© 2022 - Dutchclamp North America  -  16 Industrial Parkway S, Suite 313. Aurora, ON, L4G 0R4  CANADA